- |
- Products
- |
- Oil Temperature Control Units
- |
- CLASSIC Oil TT-390/2
Powerful oil temperature control unitalso available as 1-circuit deviceCLASSIC Oil TT-390/2
Tool molds, rollers, plates
Key data
- Maximum temperature 360°C
- Medium oil
- Heating power versions 2 x 16kW I 2 x 24kW
- Cooling capacity 2 x 90 kW @ 360°C
- System cooling indirect
- Pump capacity with mechanical seal 100 l/min; max. 5.5 bar
- With magnetic coupling 100 l/min; max. 5.5 bar
Functions
- Self-optimizing temperature controller with temperature display
1/10°C – steps - Display in °C or °F as well as l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature monitoring
- Switchover for temperature control on the mold
- Heaters switchable in steps
- Heaters with cascade connection (only for 24 kW)
- Pressure display
- Automatic mold emptying
- Leak stopper device – operation in pressure and vacuum mode possible
Construction
- High temperature pump with mechanical seal or magnetic coupling
- Hot oil circuit with by-pass that ensures internal oil circulation with closed valves
- Calcification-free heat exchanger
- No cracking of the oil thanks to special heating design
- Expansion vessel with collecting vessel
- Device on rollers
Safety devices
- Level control as dry running protection
- Expansion vessel with safety shut-off in case of overflow
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breaker
- Main switch, control transformer and motor protection switch
Products InformationTT-390/2
Product | TT-390/2 | ||||
---|---|---|---|---|---|
Temperature range | °C | 360 | |||
Heat transfer medium | oil | ||||
Filling amount | l | 30 I 42 | |||
Expansion volume | l | 36 | |||
Heating capacity | kW | 2 x 16 I 2 x 24 | |||
Cooling system | indirect | ||||
Tubular heat exchanger | kW | 90 | |||
Plate heat exchanger | kW | ||||
At flow temperature | °C | 360 | |||
Pump | |||||
Motor | kW | 1.8 | |||
Pump system see diagram | |||||
Typ Z: axial face sealed 100 l/min; max. 5.5 bar | ⚫ | ||||
Typ A: magnetic drive 100 l/min; max. 5.5 bar | ◯ | ||||
Typ X: 260 l/min; max. 4.0 bar | |||||
Typ Y: 200-500 l/min; max. 4.0 bar | |||||
Suction capacity vakuum | mWS | 8 | |||
Controller | MP-888 | ||||
Measurement sensor | FeKo Typ J | ||||
Connections | |||||
Medium | 3/4" BS | ||||
Cooling water outlet | 1" BS | ||||
Cooling water inlet | 1" BS | ||||
Water-glycol | - | ||||
Compressed air min. | bar | - | |||
Dimensions incl. castors, LxWxH | mm | 1240x720x1400 | |||
Weight empty approx. | kg | 335 | |||
Colour | silvergrey RAL 7001 | ||||
Functions | ● standard/ ○ optional / - not possible | ||||
Flow control | ⚫ | ||||
Leakstopper device | ⚫ | ||||
Mould drain | ⚫ | ||||
Temperature regulation at the consumer | ⚫ | ||||
Interface controller | ◯ | ||||
Level control | ⚫ | ||||
Visual fault indications | ⚫ | ||||
Acoustic warning | ⚫ | ||||
Pressure regulation | - | ||||
Double circuit version | ⚫ |