- |
- Products
- |
- Pressurised Water Control Units
- |
- TT-142 N
Temperature control system with flexible application range for injection moulds, small rollers, extrudersTT-142 N
Injection moulds
Summary
- Maximum temperature 140°C
- Medium water
- Heating capacity 12 kW
- Cooling capacity 60 kW @ 140 °C
- Cooling system indirect
- Pump capacity 110 l/min; max. 5.0 bar
Functions
- Self-optimizing temperature controller with temperature display
1/10°C – steps - Display in °C or °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Heating switchable in stages
- Display of system and flow pressure
- Automatic water filling
- Automatic air venting
- Pressure relief
Construction
- Proven pump with mechanical seal
- Limescale free heat exchanger
- All parts in contact with water are made of stainless steel or bronze
- Unit on castors
Safety feature
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
- Main switch, transformer and motor protection switch
Cooling capacity
Pump capacity
| Product | TT-142 N | ||||
|---|---|---|---|---|---|
| Temperature range | °C | 140 | |||
| Heat transfer medium | water | ||||
| Heating capacity | kW | 12 | |||
| Cooling system | indirect | ||||
| Tubular heat exchanger | kW | 60 @ 140 °C | |||
| Plate heat exchanger | kW | ||||
| Direct | kW | ||||
| Pump system see diagram | |||||
| Typ N: 110 l/min; max 0.5 bar; motor 1.8 kW | ⚫ | ||||
| Typ B: 75 l/min; max 6.5 bar; motor 1.8 kW | |||||
| Typ P: 36 l/min; max 5.0 bar; motor 1.1 kW | |||||
| Typ W: 250 l/min; max 4.5 bar; motor 4.5 kW | |||||
| With booster pump | - | ||||
| Suction capacity vakuum | mWS | 8 | |||
| Controller | MP-888 | ||||
| Measurement type | FeKo Typ J | ||||
| Connections | |||||
| Medium | 3/4" BS | ||||
| Cooling water | 3/8" BS | ||||
| Compressed air | - | ||||
| Dimensions incl. castors, LxWxH | mm | 870x360x915 | |||
| Weight empty approx. | kg | 107 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | ⚫ | ||||
| Leakstopper device | - | ||||
| Presure relief | ⚫ | ||||
| Mould drain by comporessed air | - | ||||
| Temperature control at the consumer | - | ||||
| Interface controller | ◯ | ||||
| Automatic refill | ⚫ | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||