- |
- Products
- |
- Water Temperature Control Units
- |
- TT-108 K
Direct cooled device with high flow rate and return volumeTT-108 K
Moulds, plates
Eckdaten
- Maximum temperature 90°C
- Medium water
- Heating capaity 18 kW I 27 kW I 36 kW I 45 kW
- Cooling capacity 260 kW @ 90°C
- Cooling system direct
- Pump capacity 200 l/min; max. 4.3 bar
Functions
- Self-optimizing temperature controller with temperature display
1/10°C – steps - Display in °C to or °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Switchover for temperature control on the mould
- Heating switchable in stages
- Heaters with cascade connection (only 27 kW / 36 kW / 45 kW)
- Pressure display
- Automatic or manual refill
- Automatic mould drainage
- Leakstopper device – operation in pressure and vacuum mode possible
Construction
- Submersible sealless pump made from bronze
- Powerful direct cooling
- Corrosion resistant device for a long service life
- All parts in contact with water are made of stainless steel or bronze
- Unit on castors
Safety features
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
Product inforamtionsTT-108 K
Product | TT-108 K | ||||
---|---|---|---|---|---|
Temperature range | °C | 90 | |||
Heat transfer medium | water | ||||
Filling amount max. | l | 40 | |||
Heating capacity | kW | 18 I 27 I 36 I 45 | |||
Cooling system | direct | ||||
tubular heat exchanger | kW | ||||
Plate heat exchanger | kW | ||||
Direct | kW | 260 | |||
At flow temperature | °C | 90 | |||
Pump system see diagram | |||||
Typ L: 19 l/min; max. 2.9 bar; motor 0.27 kW | |||||
Typ E: 60 l/min; max. 4.0 bar; motor 0.75 kW | |||||
Typ H: 60 l/min; max. 7.0 bar; motor 1.50 kW | |||||
Typ K: 200 l/min; max. 4.3 bar; motor 2.2 kW | ⚫ | ||||
Typ W: 250-350 l/min; max. 4.5 bar; motor 4.0 kW | |||||
Typ V: 580 l/min; max. 4.1 bar; motor 7.5 kW | |||||
Suction capacity vakuum | mWS | 8 | |||
Controller | MP-888 | ||||
Measurement type | FeKo Typ J | ||||
Connections | |||||
Medium | 1" BS | ||||
Cooling water | Inlet 1/2" BS Outlet 1 1/2" BS | ||||
Compressed air | - | ||||
Dimensions incl. castors, LxWxH | mm | 1250x480x1400 | |||
Weight empty approx. | kg | 160 | |||
Colour | silvergrey RAL 7001 | ||||
Functions | ● standard/ ○ optional / - not possible | ||||
Flow control | ⚫ | ||||
Leakstopper device | ⚫ | ||||
Mould drain | ⚫ | ||||
Temperature control at the consumer | ⚫ | ||||
Time limited water refill | - | ||||
Interface controller | ◯ | ||||
Automatic refill | ⚫ | ||||
Level control | ⚫ | ||||
Visual fault indications | ⚫ | ||||
Acoustic warning | ⚫ | ||||
Pressure regulation | - |